ASI183 series is the newest series in this year! good news it this series is released and will be ready for shipping at the end of this December!!
Introducing the ASI183 camera series, the most sensitivie cameras in ZWO history. Peak Q.E. of the mono sensor reaches 84%!
ASI183 series including 4 models:
ASI183MM Pro mono cooled camera 999USD
ASI183MC Pro color cooled camera 899USD
ASI183MM mono uncooled camera 699USD
ASI183MC color uncooled camera 599USD
If you place an order before 31th of this December, you will enjoy a Christmas discount of 50USD
Let’s take a look of the most important one:
Diagonal 15.86 mm Approx. 20.48M-Effective Pixel Monochrome/Color CMOS Image Sensor
In the astronomic application field, Sony IMX183CLK-J (monochrome) and IMX183CQJ-J (color) sensors uses a very high sensitivity back-illuminated structure with high resolution 2.4 μm square unit pixel. The optical size is 1 inch.
The ASI183 Pro camera includes a 256MB DDR3 memory buffer to help improve data transfer reliability. Additionally, the use of a memory buffer minimizes amp-glow, which is caused by the slow transfer speeds when the camera is used with a USB 2.0 port.
DDR memory buffer is the main difference between ASI “Cool” and “Pro” cameras.
The ASI183 cameras has a very large full well capacity（15000e） for such small pixel size, 1.6e read noise @ 30DB, and 12stops dynamic range @ Gain=0. The ASI183 cameras also utilize firmware features to minimize amplifier glow for maximum performance in astrophotography.
Reliable MechanicsASI183 Pro has same mechanics as ASI1600 Pro. There are four screws that seal the sensor chamber. Our camera design has been extensively tested and is very stable.
Even when used in higher humidity environments, ASI183 Pro will still work fine without dew problems.
Fast FPS can be used in solar and lunar imaging, as well as for live viewing/EAA.The high speed readout may also be used for real-time focusing, true lucky imaging of double stars and other small objects, planetary imaging of the major planets in the solar system, and much more.
10Bit ADC
5496×3672 19fps
3840×2160 41.04fps
1920×1080 80.10fps
1280×720 117.30fps
12bit ADC
5496×3672 19fps
3840×2160 36.12fps
1920×1080 70.48fps
1280×720 103.23fps
Sony’s back-illuminated Exmor R technology, giving it excellent Deep Sky performance. ASI183 QE peak reaches a remarkable 84%. In Ha channel, QE is still over 60%.
Having high QE means more of the light that enters your telescope and reaches the sensor is actually used. With 84% peak Q.E. and no less than ~50% within the visible spectrum, the ASI183 will utilize a high percentage of the light that reaches it, improving your signal quality.
The dark current of the ASI183 is extremely low, based on our test results.
USB 3.0 Port: Provide 5Gb bandwidth to make it possible for ASI183 Pro to run at 19 fps (12bit, normal mode) or 19 fps (10bit, high speed mode) at full resolution(20.18Mega).
Recommended cooler power supply: 12V @ 3-5A (or more) DC adapter (2.1×5.5mm, center pole positive). Also suitable: DC battery with 9-15V.
Using a battery with 9-15V is also suitable for the cooler power supply.
USB 2.0 HUB: can connect with various accessories, such as filter wheel, guide camera and electronic focuser, so you can better manage your cables. The ASI183 Pro includes two short 0.5m USB 2.0 cables. The integrated USB 2.0 hub is powered by the external power source if you connect one.
The ASI183 Pro has a 2-stage TEC cooling system that enables deep cooling (40°C-45°C below ambient). The cooler requires an external power supply, which is not included with the camera.
ASI183 Pro box includes all necessary cables, drivers, adapters, and manuals.
https://www.cloudynights.com/topic/599475-sony-imx183-mono-test-thread-asi-qhy-etc
Hello Vasile, thanks for accepting our interview invitation. Congratulations on winning the ASIWEEK competition in week #32/2024! Q1: At first, congratulation that your nice image won #ASIWEEK. Can you introduce
Hello Giacomo, thanks for accepting our interview invitation. Congratulations on winning the ASIWEEK competition in week #34/2024! Q1: At first, congratulation that your nice image won #ASIWEEK. Can you introduce
Hello Kamil, thanks for accepting our interview invitation. Congratulations on winning the ASIWEEK competition in week #28/2024! Q1: At first, congratulation that your nice image won #ASIWEEK. Can you introduce
Hello Sandro, thanks for accepting our interview invitation. Congratulations on winning the ASIWEEK competition in week #24/2024! Q1: At first, congratulation that your nice image won #ASIWEEK. Can you introduce
Hello John, thanks for accepting our interview invitation. Congratulations on winning the ASIWEEK competition in week #25/2024! Q1: At first, congratulation that your nice image won #ASIWEEK. Can you introduce
2 Comments
Brent
very cool. what would you expect the results to be with this camera vs the asi 1600 mono on a 425mm/F2.1 hyperstar setup ??
would it work as well as the 1600 at high gain (300) ?
will the AR coated sensor make a noticeable difference over the 1600 ??
thanks
Sam Wen
I think it should perform very well with such short focal ratio system
AR coating must helps